Water Cooling Reactor


Satons has very mature technology and technology on the manufacturing of water cooled reactor and a group of experienced professional technical talents, products can be designed according to customers’ technical requirements and parameters, manufacturing various types of non-standard, special, professional working frequency, middle and high frequency device equipped reactors. Satons has established the long-term cooperative relationship with many equipment manufacturers.

Satons has very mature technology and technology on the manufacturing of water cooled reactor and a group of experienced professional technical talents, products can be designed according to customers’ technical requirements and parameters, manufacturing various types of non-standard, special, professional working frequency, middle and high frequency device equipped reactors. Satons has established the long-term cooperative relationship with many equipment manufacturers.

PRODUCT

Reactor
Filter
Transformer
Power quality inspection
Reactive power compensation
Active filter
The integrated solutions for improving power quality
Customization

Technical specification

 

Water and Electricity Separation (Plate Type Water Cooled Reactor) The water cooled heat radiation plate is equipped in the wire package of the plate type water cooled reactor, and the heat generated by the reactor is exported via water media through the heat radiation plate, so as to achieve the purpose of reducing the temperature rise. The reactor has water power separation without leakage current generation. The water-cooled reactor produced by our company has the current of 500-1500A, inductance of 0.01-0.5mH, which is widely used in wind power, frequency inverter and other electrical equipments.
Water and Electricity Integration (Tube Type Water Cooled Reactor) Winding is made by adopting the hollow copper pipe, the heat generated by copper loss is transferred by the heat conduction medium inside the copper pipe (pure water or mixed liquid) , the heat conduction medium and heat conductor shall have good thermal contact, the thermal conductivity is high, and the winding can bear big current. The company produces water-cooled reactor with the current of 1-10KA, inductance of 0.1-2.0mH, which is widely used in smelting, induction heating and other industrial equipment.

 

Product Features

 

The water route of reactor adopts the separation structure of water and electricity, which is convenient to maintain, safe and reliable. The reactor adopts high quality cold rolled silicon steel sheet with low loss, small size and light weight. The reactor can work under the condition of high protection level and poor heat dissipation condition, and the temperature rise is low. The water route working pressure of reactor water is 1-10Bar, and the water route is stable and reliable.

 

Technical specification

 

Water and Electricity Separation (Plate Type Water Cooled Reactor) The water cooled heat radiation plate is equipped in the wire package of the plate type water cooled reactor, and the heat generated by the reactor is exported via water media through the heat radiation plate, so as to achieve the purpose of reducing the temperature rise. The reactor has water power separation without leakage current generation. The water-cooled reactor produced by our company has the current of 500-1500A, inductance of 0.01-0.5mH, which is widely used in wind power, frequency inverter and other electrical equipments.
Water and Electricity Integration (Tube Type Water Cooled Reactor) Winding is made by adopting the hollow copper pipe, the heat generated by copper loss is transferred by the heat conduction medium inside the copper pipe (pure water or mixed liquid) , the heat conduction medium and heat conductor shall have good thermal contact, the thermal conductivity is high, and the winding can bear big current. The company produces water-cooled reactor with the current of 1-10KA, inductance of 0.1-2.0mH, which is widely used in smelting, induction heating and other industrial equipment.

 

Product Features

 

The water route of reactor adopts the separation structure of water and electricity, which is convenient to maintain, safe and reliable. The reactor adopts high quality cold rolled silicon steel sheet with low loss, small size and light weight. The reactor can work under the condition of high protection level and poor heat dissipation condition, and the temperature rise is low. The water route working pressure of reactor water is 1-10Bar, and the water route is stable and reliable.

 

Energy Feedback Reactor

Reference / Implementing Standards GB1094.6-2011 Electric transformer JB9644-1999 Semiconductor electric drive reactor IEEE519 - 1992/EN6100-5-2

Harmonic filter

Reference/ lmplementing Standards IEEE519(EN - 2-5) Electromagnetic Magnetic Compatibility(EMC) EN61558-2-20 (VDE 507-2-20) Safety of Power Supply Equipment and Similar Equipment GB145493-93 Power Quality Public Power Grid Harmonic Wave

LCL filter

Reference/ lmplementing Standards GB 1094.6-2011 Reactor GB 1094.6-2011 Reactor (eqvlEC289:1987) JB 9644-1999 semiconductor electric drive reactor IEEE519-1992 GBT14549-93

EMI filter

Please see the details

Output Reactor

It is installed at the output end of the inverter, which is used to limit the capacitive charging current of the inverter and the motor connecting cable, and inactivate the voltage rise rate of PWM wave output by the inverter. When the length of motor cable exceeds a certain value, it is recommended to insert a motor reactor between the inverter and the motor, which is used to compensate the recharging current of capacitor in case of the long wires. The maximum length depends on the rated value of the frequency converter and the type of the motor cable.

Input Reactor

The input reactor can be used to provide improved overload protection for the line power supply, and to reduce the current harmonic distortion produced by the inverter. Increase the power factor of input power supply, reduce the high harmonic, and restrain the surge of frequency converter in the power supply equipment

Isolation transformer

The SG series three-phase dry-type isolation transformer is a new generation of energy-saving dry-type transformers developed and produced by our company on the basis of reference to similar international products and combined with applications. From...

DC Smoothing Reactor

DC smoothing reactor is used in the rectifying circuit to restrain the ripple pulse component after rectification and make the rectified current continuous, so as to improve the output branch waveform and guarantee the normal operation of DC equipment. The smoothing reactor is used as the series reactor in DC machine supplied by the converter, in order to eliminate the DC link in the current and voltage DC link converter; It is supposed to decouple the converter components on DC side. The power converter on DC side has high pulse circuit feedback to reduce the difference value limit, so as to limit the ring current on the connection with ring current, at the same time, limit the the rising rate of current. The smoothing reactor adopts the iron core of TEM and TET or TPK air core reactor, depending on the requirements on electromagnetic induction.

Sine wave filter

Reference / lmplementing Standards: IEEE519(EN61000-5-2) Electromagnetic compatibility (EMC) EN 61558-2-20(VDE507-2-20) Safety of power supply equipment and similar equipment GB 145493-93 Power quality, utility grid harmonics

Dv/dt filter

Reference / Implementing Standards: IEC60076-6:2007 Reactor GB1094.6-2011 Reactor (eqvIEC289:1987) JB9644-1999 Semiconductor electric drive reactor

Energy Feedback Reactor

Reference / Implementing Standards GB1094.6-2011 Electric transformer JB9644-1999 Semiconductor electric drive reactor IEEE519 - 1992/EN6100-5-2

Harmonic filter

Reference/ lmplementing Standards IEEE519(EN - 2-5) Electromagnetic Magnetic Compatibility(EMC) EN61558-2-20 (VDE 507-2-20) Safety of Power Supply Equipment and Similar Equipment GB145493-93 Power Quality Public Power Grid Harmonic Wave

LCL filter

Reference/ lmplementing Standards GB 1094.6-2011 Reactor GB 1094.6-2011 Reactor (eqvlEC289:1987) JB 9644-1999 semiconductor electric drive reactor IEEE519-1992 GBT14549-93

EMI filter

Please see the details

Output Reactor

It is installed at the output end of the inverter, which is used to limit the capacitive charging current of the inverter and the motor connecting cable, and inactivate the voltage rise rate of PWM wave output by the inverter. When the length of motor cable exceeds a certain value, it is recommended to insert a motor reactor between the inverter and the motor, which is used to compensate the recharging current of capacitor in case of the long wires. The maximum length depends on the rated value of the frequency converter and the type of the motor cable.

Input Reactor

The input reactor can be used to provide improved overload protection for the line power supply, and to reduce the current harmonic distortion produced by the inverter. Increase the power factor of input power supply, reduce the high harmonic, and restrain the surge of frequency converter in the power supply equipment

Isolation transformer

The SG series three-phase dry-type isolation transformer is a new generation of energy-saving dry-type transformers developed and produced by our company on the basis of reference to similar international products and combined with applications. From...

DC Smoothing Reactor

DC smoothing reactor is used in the rectifying circuit to restrain the ripple pulse component after rectification and make the rectified current continuous, so as to improve the output branch waveform and guarantee the normal operation of DC equipment. The smoothing reactor is used as the series reactor in DC machine supplied by the converter, in order to eliminate the DC link in the current and voltage DC link converter; It is supposed to decouple the converter components on DC side. The power converter on DC side has high pulse circuit feedback to reduce the difference value limit, so as to limit the ring current on the connection with ring current, at the same time, limit the the rising rate of current. The smoothing reactor adopts the iron core of TEM and TET or TPK air core reactor, depending on the requirements on electromagnetic induction.


MESSAGE
*Name
Phone
*E-Mail
Address
*Message